Bitsight's Groma scanning engine maintains a continuous global survey of the public-facing Internet. Here you’ll find daily updates to an aggregated view of the Internet’s vendors, products, and vulnerabilities observed over the prior 30 days. These software observations are identified by an address, port, and domain name.
Activate E-stop – door stops within 10 mm of travel. 8. Troubleshooting | Problem | Likely Cause | Remedy | |------------------------|-------------------------------|----------------------------------| | Door does not move | No power, blown fuse | Check input supply, replace fuse | | Door reverses randomly | Sensor misalignment | Clean & align photocells | | Unusual belt noise | Low belt tension | Re-tension belt | | Slow operation | P01/P02 set too low | Increase speed parameter | 9. Maintenance Schedule | Interval | Action | |----------------|------------------------------------------| | Monthly | Clean rail, check belt tension | | Quarterly | Lubricate carrier wheels (silicone spray)| | Annually | Backup battery test, controller firmware check | 10. Specifications | Parameter | Value | |--------------------|---------------------------| | Max door weight | 200 kg per leaf | | Max width | 2500 mm per leaf | | Power supply | 230V AC, 1.5A | | Standby power | 12 W | | Protection class | IP20 | | Operating temp | -15°C to +50°C | Document version: 1.0 Compliance: EN 16005, ANSI/BHMA A156.10 ⚠️ This write-up is a general template. For official installation, always use the exact manual provided by Crawford.
Activate photocell during closing – door must reverse immediately. crawford cdm9 950 installation manual
Reconnect motor, press push button. Door must open smoothly, hold, close. Activate E-stop – door stops within 10 mm of travel