The Standard for Determining the Water Vapour Permeability of Textile and Plastic Coatings DIN 53 505 (often stylized as DIN 53505) is a retired but historically significant German industry standard that defined the methodology for determining the water vapour permeability of textile fabrics, plastic coatings, and film laminates. While largely superseded by international standards (ISO 1420, ISO 15496, or ASTM E96), understanding the original DIN 53505 framework remains critical for legacy material validation, reverse-engineering classic products, and maintaining compliance for older supply contracts. Note on Nomenclature: There is occasional confusion between DIN 53505 (Shore hardness for rubber/plastics) and DIN 53 505 (water vapour permeability). This write-up focuses strictly on the permeability standard. Core Scope of DIN 53 505 The standard prescribed a gravimetric (weight-based) method to measure the rate at which water vapour passes through a unit area of a material under controlled temperature and humidity conditions.
| Parameter | Specification | |-----------|----------------| | | 23 °C / 85 % relative humidity (or 38 °C / 90 % RH) | | Test Duration | Typically 24 to 72 hours | | Sample Size | Circular specimens, usually 100 cm² exposed area | | Measurement | Weight gain of a desiccant (dry cup) or weight loss of a water reservoir (wet cup) | din 53 505 pdf
