Din 5480 Spline Dimensions Pdf 〈2026 Edition〉

Here’s a proper technical write-up regarding , suitable for an engineering reference or documentation portal. Technical Reference: DIN 5480 Spline Dimensions (PDF Guide) 1. Overview DIN 5480 is a German (Deutsches Institut für Normung) standard that defines involute splines with modulus (module) based dimensions for cylindrical connections. Unlike older standards (e.g., DIN 5463, DIN 5464) which used profile shift based on reference diameter, DIN 5480 uses basic rack reference profiles and module series for spline sizing.

| Parameter | Symbol | Description | |-----------|--------|-------------| | Module | m | Size of tooth profile | | Number of teeth | z | Teeth count | | Pitch diameter | d | = m × z | | Major diameter (internal) | Dₑᵢ | Outside diameter of internal spline | | Minor diameter (internal) | Dᵢᵢ | Root diameter of internal spline | | Major diameter (external) | dₑₑ | Outside diameter of external spline | | Minor diameter (external) | dᵢₑ | Root diameter of external spline | | Form diameter | dₓ | Start of involute profile | | Space width / Tooth thickness | s | Nominal, min, max based on fit | | Root radius | ρ | Minimum allowable fillet radius | | Measurement over pins | M | For internal/external inspection | Module m = 2 mm, Pressure angle α = 30°, Fit: Centering on major diameter, Tolerance H/h | Teeth (z) | Pitch diam (mm) | Major diam ext (mm) | Minor diam ext (mm) | Space width min/max (mm) | |-----------|----------------|---------------------|---------------------|---------------------------| | 20 | 40.0 | 44.0 | 35.0 | 3.14 / 3.22 | | 24 | 48.0 | 52.0 | 42.5 | 3.14 / 3.22 | | 28 | 56.0 | 60.0 | 50.0 | 3.14 / 3.22 | din 5480 spline dimensions pdf