How To Open Bootloader Mode On Itel A48 Apr 2026

Go back to Settings > System > Developer Options and turn on USB Debugging and OEM Unlocking .

Type the following command and press Enter:

Keep holding both buttons until the screen turns on. You will see the ITEL logo, then a dark screen with small text. How to Open Bootloader Mode on ITEL A48

Connect your phone to your PC via USB cable.

Press the Power button once to select it. Your device will now enter Bootloader/Fastboot Mode. Method 2: Using ADB & Fastboot Commands (For Advanced Users) This method requires USB Debugging to be enabled on your phone. Go back to Settings > System > Developer

The Bootloader is a low-level piece of code that runs before the operating system (Android) on your ITEL A48. Accessing Bootloader Mode is essential for advanced operations like installing custom ROMs, gaining root access, or unbricking your device.

Press and hold the Volume Up (+) button and the Power button simultaneously. Connect your phone to your PC via USB cable

Power off your ITEL A48 completely. Wait 10 seconds.

Use the Volume Down button to navigate to the option labeled "Bootloader" or "Fastboot" (if available).

Release both buttons. You are now in Factory Mode or SPD Upgrade Mode – this is the bootloader-equivalent interface for Spreadtrum (Unisoc) chipsets used in the A48.

On your PC, open a command prompt (CMD) in the folder where you have ADB and Fastboot installed.