Igbt Zvs Driver Review

While the classic "ZVS" circuit (the famous Mazilli driver) typically uses MOSFETs, swapping them for transforms this oscillator into a nearly indestructible powerhouse for high-voltage projects.

Enter the .

If you are tired of replacing MOSFETs every time you sneeze near your flyback, the IGBT ZVS driver is your solution. It is slower than MOSFETs (so don't use it for MHz range), but for 20kHz-100kHz high-voltage work, it is bulletproof. igbt zvs driver

They get hot. They explode under slight over-voltage. And if your gate drive is weak, they simply refuse to switch fast.

Without zeners, the resonant tank can swing the gate voltage to 30V+. That will puncture the gate oxide instantly. Use 15V bidirectional (back-to-back) zeners. The Schematic (The Classic IGBT ZVS) Here is the proven recipe for a 200W+ IGBT ZVS driver: While the classic "ZVS" circuit (the famous Mazilli

Build it ugly. Build it strong. And always discharge your capacitors before touching anything.

If you have ever built a flyback driver or a solid state Tesla coil (SSTC) , you have probably wrestled with MOSFETs. It is slower than MOSFETs (so don't use

IGBTs have larger gate capacitance and a lower maximum gate voltage (usually ±20V). The standard ZVS driver uses a 12V or 15V zener diode across the gate. For IGBTs, you need a 15V or 18V zener, and you need it.