Jny Lx1 Downgrade 12 To 10 | FRESH |

loader> set currdev=disk0: loader> unload loader> load /boot/kernel.10.4 loader> boot -s Once in single-user mode:

root@jny_lx1> configure exclusive root@jny_lx1# load override /var/tmp/minimal-config-r10.conf # pre-sanitized root@jny_lx1# commit check root@jny_lx1# commit Download junos-install-mx-x86-64-10.4R10.tgz (or for your platform) from the Juniper support site. Copy to device: jny lx1 downgrade 12 to 10

WARNING: Kernel version mismatch. Proceeding with force. WARNING: LX1 microcode version rollback required. This may cause temporary packet loss. root@jny_lx1> request system reboot at now After reboot (takes ~10-12 minutes), the system may fail to boot fully – you will likely land in loader prompt ( loader> ). This is expected due to boot environment differences. set currdev=disk0: loader&gt

# Via USB (mount /dev/da0s1) root@jny_lx1> file copy /usb/junos-10.4R10.tgz /var/tmp/ Release 12’s automatic snapshot/rollback feature will interfere. load /boot/kernel.10.4 loader&gt