netsh wlan show drivers Look for “Hosted network supported: Yes” | Problem | Solution | |----------------------------------|--------------------------------------------------------------------------| | Driver installs but no networks | Disable IPv6 on the adapter temporarily, set Wireless Mode = b/g/n only | | Slow speed (only 54 Mbps) | Set Channel Width = Auto 20/40 MHz, disable “Bluetooth coexistence” if present | | Blue screen / DPC watchdog | Use older driver version (e.g., 5.0.45.0) or update BIOS/chipset drivers | | Wi-Fi disconnects randomly | Disable “Allow computer to turn off this device” in Power Management tab | Final recommendation For most users: Use the RT2870 driver version 5.0.64.0 from Station-Drivers. It supports the widest range of Ralink 802.11n chips (RT2860, RT3090, RT5390, etc.) and enables full N speeds, WPA2, and stable operation on Windows 10 64-bit.