Reset Epson M1120 Apr 2026
When this pad reaches its predetermined capacity (approximately 8,000–15,000 pages, depending on usage), the printer halts operation and displays a "Service Required" error (usually blinking error lights, or a message on the screen if applicable). , which is distinct from a factory reset or ink level reset. Critical Warning: Resetting the counter without replacing or cleaning the waste ink pad will eventually cause ink overflow, leading to permanent printer damage, electrical shorts, and voiding of the warranty. 2. When Is a Reset Required? The following symptoms indicate a required reset:
| Reset Type | Purpose | Required Tool | |------------|---------|----------------| | | Reset waste ink absorption counter | Epson Adjustment Program (WICreset, or licensed software) | | Ink Level Reset | Reset ink tank level sensors | Manual button sequence or refill detection | | Factory Reset | Restore network/settings to default | Menu option or button hold | reset epson m1120
No. Ink levels are managed by separate sensors. Refill ink tanks manually when low. Ink levels are managed by separate sensors
Yes. Firmware v1.20 and above (released 2024) blocks some reset tools. Downgrading firmware is not possible. Use WICreset for newer firmware. 10. Conclusion Resetting the Epson EcoTank M1120 waste ink counter is a necessary but delicate procedure that should only be performed when the printer explicitly requests service. While third-party tools exist, users must physically verify the condition of the waste ink pad before resetting to prevent catastrophic ink overflow. depending on usage)
This document is for technical reference only. The author assumes no liability for damage resulting from improper use of reset tools or physical modification of the printer.
Typically 2–3 resets before the physical pad overflows. After that, the pad must be replaced or modified with an external waste ink bottle.
| Symptom | Description | |---------|-------------| | | Power light flashes alternately with error light (paper/ink light). | | Status Monitor | Epson Status Monitor displays: "The printer’s ink pad is at the end of its service life. Please contact Epson Support." | | Print Block | The printer refuses to print or scan, even with full ink tanks. | | Waste Ink Counter | Counter reading exceeds 100% (Epson adjustment program required). | 3. Types of Reset for Epson M1120 It is crucial to differentiate between three common “reset” requests: