Zte H2640 Firmware -

Analysis of ZTE H2640 Firmware: Architecture, Security Implications, and Modification Vectors Abstract The ZTE H2640 is a widely deployed home gateway device (fiber optic ONT/ONU) used in Fiber-to-the-Home (FTTH) networks. This paper presents a technical analysis of its firmware, including the filesystem structure, boot process, encryption methods (if any), common vulnerabilities, and methods for extracting, modifying, and repacking firmware. The goal is to inform security researchers, network administrators, and embedded system developers about potential risks and customization opportunities. 1. Introduction The ZTE H2640 series (including variants like H2640V9, H2640R) runs a Linux-based operating system. The firmware controls broadband access, Wi-Fi, VoIP, and TR-069 remote management. Despite its prevalence, little public documentation exists on its internal firmware design. This paper provides a systematic review based on reverse engineering and analysis of publicly available firmware update files. 2. Firmware Acquisition and Structure 2.1 Obtaining Firmware Official firmware is distributed as .bin or .zip files via ISP portals or ZTE’s support site. Example filename: ZTE_H2640V9_UPGRADE_BOOT_v2.0.1.bin 2.2 Initial Analysis with Binwalk Using binwalk on a sample firmware image reveals:

mksquashfs squashfs-root/ newroot.sqsh -comp xz -b 256k cat kernel.uImage newroot.sqsh > custom_firmware.bin Must match original partition boundaries and checksum algorithm (often CRC32 or custom XOR). Some older firmware versions do not verify signatures. On newer versions, hardware-backed secure boot prevents unsigned code. Attackers use serial console (UART) or flash programmer to directly write modified flash contents. 6. Known Vulnerabilities (CVE Examples) | CVE | Description | |-----|-------------| | CVE-2020-10101 | Command injection in web interface (ZTE H2640) | | CVE-2020-10102 | Hardcoded backdoor credentials | | CVE-2019-3412 | Buffer overflow in DHCP client | zte h2640 firmware

$ binwalk ZTE_H2640V9.bin 0 0x0 uImage header, header size: 64 bytes, ... 64 0x40 LZMA compressed data, properties: ... 2097152 0x200000 Squashfs filesystem, little endian, ... /etc/inittab After modifications

# In extracted squashfs-root/etc/init.d/telnet echo "::respawn:/usr/sbin/telnetd -l /bin/sh" >> /etc/inittab After modifications, repack with: nand erase 0x200000 0x600000

# Extract firmware binwalk -Me firmware.bin mksquashfs squashfs-root/ new.sqsh -comp lzma Flash via U-Boot (serial) tftp 0x80000000 custom.bin; nand erase 0x200000 0x600000; nand write 0x80000000 0x200000 0x600000 Enable telnet (persistent) echo "/usr/sbin/telnetd -l /bin/sh &" >> /etc/rc.local